All prices shown do not include any parts.
First Stage, 2nd Stage, Occy/Air2, SPG Labour
1st stage $62.50
2nd stage $57.50
Occy $57.50
SPG Free when with a reg set service
Consumables
Including Lubricants and Cleaning solutions
$10
Service Kits
Prices ranges from $20 - $85 per regulator depending on make and model
e.g. Standard reg set - Scubapro MK25/S600 w R095 occy with spg
Total cost would be $314.35
Parts
Part cost + postage and handling costs
Additional Cleaning due to corrosion/mould/infestation
$15 per item
Priority Service (24hr turn around)*subject to parts availability
$80 on top of service cost
Bouyancy Control Device
$49.90 + Parts
Battery Change (non oil filled)
From $50
Watch Pressure Test
$8.25 + Parts
Transmitter battery check
$45 (The only way to check battery is by disassembling transmitter therefore orings need to be replaced, so we will perform a full battery change)
Hydrosatic Test Scuba Tank
$79 inc Air fill and O'rings
Hydrosatic Test Non-Scuba Tank
$105 inc Air fill and O'rings
Tank Valve Service
$35 + Parts
02 Clean Tank Valve
$10 + Parts
Internal Rust Treatment - Scuba Tank
$60
02 Clean Tanks
$35
Air fills
$17
Safety Check Gear Package not purchased at Go Dive Brisbane
$90 for full gear package (No warranties)
Safety Check Individual items not purchased from Go Dive Brisbane
$35 per item if not full package
Hourly Labour Charge
$115 Per Hour (For outside any Fixed Service ie Battery Change, Safety Checks)
