Any Scubapro HUD purchased will include FREE:

• Scubapro D-Mask size Small
• Includes the HUD fitting for your DMask, and a separate fitting for other Twin Lens masks

Scubapro's new heads-up display computer will have you doing a double take. The Heads-Up Display (HUD) computer attaches to any double lens mask and displays all relevant dive data and quick view compass in a simple digital screen. While the HUD isn't for everyone it can be especially useful for underwater photographers and videographers not wanted to disrupt their shot by constantly looking at depth and no decompression limits. The HUD also has use in technical and military diving where it will see its biggest success. 

There's never been anything like it. The new Galileo HUD is a massive leap forward in computer diving that will forever change the way you dive. This new-to-the-dive-world technologically-advanced computer offers a heads-up display that is mounted on a dive mask. Delivering excellent readability along with hands-free data monitoring, with the introduction of the Galileo HUD, Scubapro engineers have created a user experience unlike anything previously seen in diving.

Floating Display:
Using precision near-eye optics, the floating" display creates a micro OLED screen image with superior readability that appears at a virtual distance of approximately 3' (1 meter). This allows you to keep your eyes on both your dive data and the underwater scenery at the same time, without needing to refocus. 

Hands-Free Data:
Super-convenient for photography and technical diver's. Also, since you don't have to raise an arm or reach for a console to check your dive data, the lightweight (neutrally buoyant) HUD allows you to maintain a more streamline profile moving through the water. 

Single-Knob User Control:
When it comes time to change screens or make-adjustments, an intuitive push-wheel allows you to access functions with one hand. Simply rotate it to navigate up and down within a menu or increase or decrease a user setting. 

Flip-Up Hinge:
Enables you to tilt the HUD display up and out of the way when not needed. When it's time to resume data monitoring, simply tilt the display back down into position and you're ready to track your dive. 

Air Integration:
Easily monitor tank pressure with wireless communication between computer and tank. The Galileo HUD also supports multi-gas diving. In fact, up to 8 trimix gases can be programmed for open circuit diving as well as closed circuit rebreather (CCR) diving. CCR decompression calculations are based on 2 set points. 

Navigation:
Find your way topside with an integrated GPS or underwater with a full-tilt compass. The Galileo HUD has an internal GPS with a feature that allows waypoints to be deleted. The Galileo HUD also has a combat swimmer mode (NAVY) and is equipped with extended software that provides three additional military screens. They are designed specifically for combat swimming operations. 

 Scubapro Synergy Twin with Fitted HUD
The Galileo HUD is fabricated with highly sophisticated electronic components. The crisp color changeable OLED display is extremely easy to read. This dual algorithm computer color OLED display is a 96 x 64 pixels design. The HUD can be downloaded and recharged via its USB port (mass storage/pen drive mode). HUD is powered by a rechargeable lithium-ion battery and has a run time of 20-hours dive time. Charges fully in two hours via the USB cable. Unit has a digital depth sensor and is waterproof to 392' (120 meters). The Scubapro HUD comes with a transmitter that is easily mounted in a 7/16" high-pressure port of the first stage regulator, has dive modes of air, nitrox, trimix, gauge, apnea and closed-circuit rebreather and combat swimmer. The main display provides depth, total dive time and leg timer. The secondarily display screen provides leg timer, depth, compass, water temperature and battery voltage. The auxiliary display provides local time, maximum depth, water temperature and battery voltage. The HUD can be set for imperial (feet) or metric (meters) increments of measurements. Unit comes with an owner's manual. 

Enjoy the convenience of air integration without the hassle of a dangling hose. This low-profile Smart transmitter works with Scubapro's most advanced dive computers. It screws into a 7/16" threaded high pressure port on your first stage and relays tank pressure and true remaining bottom time (RBT) to the computer screen. The latest version features a built-in LED that gives you an estimate of pressure when the first stage is attached to a tank. This lets you know if the tank has gas without needing to activate the computer. 

Easy to use, you only need to pair it to your computer once -- the first time you use it. Coded transmission technology prevents interference between different dive computers. Powered by a user-replaceable CR2450 lithium battery that's good for three years or 150 to 200 dives. LED Indicator Status: 1,450 psi (100 bar) and over: Slow short blinking -- Greenlight. Between 1,450 psi (100 bar) and 725 psi (50 bar): Short double blinking --Orange light. Below 725 psi (50 bar): Long single blink -- Red light. Transmitter comes with an owner's manual.